OEM+ LED Bumper Light Mounting Brackets | 2025 RAM Rebel & RHO
OEM+ LED Bumper Light Mounting Brackets | 2025 RAM Rebel & RHO
OEM+ LED Bumper Light Mounting Brackets | 2025 RAM Rebel & RHO
OEM+ LED Bumper Light Mounting Brackets | 2025 RAM Rebel & RHO
OEM+ LED Bumper Light Mounting Brackets | 2025 RAM Rebel & RHO
OEM+ LED Bumper Light Mounting Brackets | 2025 RAM Rebel & RHO
OEM+ LED Bumper Light Mounting Brackets | 2025 RAM Rebel & RHO

OEM+ LED Bumper Light Mounting Brackets | 2025 RAM Rebel & RHO

130272


Regular price$179.00
/
Shipping calculated at checkout.

Orders over $99 ship FREE to the Continental US and Canada. For more information, including international shipping and Lead times, see our Shipping Policy

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Add high performance LED Off-road lighting to your 2025 RAM Rebel or RHO with our No-Drill, No-Cut bracket Kit. Installs into existing hardware behind the factory bumper and retains a clean factory look, but with aftermarket lighting performance.

FEATURES:

No bad Vibes -  Our brackets are made from North American sourced 10 Gauge Cold Rolled Steel and backed with rubber vibration dampers to isolate un-wanted movement. This results in cleaner, more powerful light output.

Fit and Finish - Cleaned, Primed, and Finished in a color matched satin black powdercoat to keep them looking as good as they work.

Straight Forward Installation - 100% bolt on design. Our our entire kit installs without ANY drilling or cutting. 

Complete kit - Add Hand Picked Baja Design Lights and Wiring for a great one-stop-shop experience

Reliable - 100% Designed, Formed, and Powdercoated by VICE professionals here in North America

Precision laser Fit - Designed with Lasers. Cut with Lasers. Lasers!

WHAT THIS KIT INCLUDES:

- Left and Right hand OEM+ LED Bumper Bracket Set with Stabilizer Brackets 

- Black Powdercoated Hardware

- Detailed Instruction Manual

DONT FORGET TO ADD:

Add a set of hand picked LP6 PRO Lights by Baja Designs and save 15% on the mounting brackets using discount code BAJAVICE. The LP6 Pro Lights in the dropdown have an amber backlight (which looks fantastic with the factory marker lights) and a Low driving beam and BLINDING high beam. More specs on the LP6 lights here: LP6 PRO LIGHT POD

If you have an upfitter switch or plan on adding one, then make sure to add the Upfitter 2-Light Harness. Otherwise, add the LP series pro harness which comes complete with a toggle switch to control all the functions the LP6 has to offer.

COMPATABILITY:

This bracket kit is compatible with 2025 RAM REBEL and RHO pickup trucks. The brackets are compatible with LED Light pods using a 10mm fastener or smaller.

Feature Vehicle is equipped with the White LP6 Driving Combo option, powered by the Upfitter Harness and Auxbeam AR-800 Switch Panel using our Auxbeam Mounting Kit

Recommended for lights up to 6" in diameter or 4.5lbs. Lights larger than 6" will fit but may induce some vibration on rougher roads.

INSTRUCTIONS:

OEM+ LED Bumper Light Mounting Brackets - Installation Instructions

  • 5 stars: 3 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
M
Michael Hefford
Great product

Just installed these on my 26 Ram Rebel and I didn’t have to remove the bumper at all. Just loosen the 6 nuts holding the bumper on until they are almost off completely, but not quite. You can then just pull the bumper out and remove the 4 bolts to mount the light brackets. I didn’t even need to lift the rubber piece to get the bolts out, as the new Ram has the rubber cut away around the bolt heads. Slide the brackets in under the rubber and reinsert the bolts! Don’t even need to unplug any wiring, but I did, just to be safe. You need an 18mm deep socket, ratchet and a 13mm wrench..that’s it. Just mount your lights and run your cable through before retightening the bumper nuts if your lights have a plug on them, or you’ll have a hard time getting them ran through.

J
Justin Mitchell
Happy with the mounting brackets

The lights are great , I was intimidated at first with the light mounts taking off the bumper. If I can do it, anyone can do it.

G
Guv'nor
Excellent fit. Easy installation

Couldn't be happier with the product. Mounting was easy and you can tell the quality.

D
Drew

Hi, can i fit a LP9 on this bracket?

VICE Design Inc

Thanks for your Question. While an LP9 will fit on this bracket, it weights approx 6.5lbs which is above our recommended capacity of 4.5lbs. On rough roads this can lead to inducing vibration of the bumper and brackets which will effect the clarity of light output.